M4C
Main Features
- Distributes four HDMI sources signal to four HDMI displays
- HDMI2.0 with 4K@60 4:4:4 8 bit and HDCP 2.2 compliant
- Support HDR 10 and HDR Dolby version
- Support remote control, button, RS232, IP control
- Support extracted digital audio over coaxial connector
- Support 3D, Support deep color 30bit, 36bit
- Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC.
- Digital audio format, pass through as DTS-HD/Dolby-trueHD/
- LPCM7.1/DTS/Dolby-AC3/DSD, Dolby Atoms, and all other HDMI audio standard formats
- Support signal retiming, No loss of quality
- Support input up to 15 meters AWG26 HDMI 2.0 standard cable length, output up to 25metres AWG24 cable length
- No driver required, Plug and play, Installs in minutes
Technical Specification
Model |
M4C |
HDMI version |
HDMI 2.0 |
HDCP version |
HDCP 2.2 |
HDMI resolution |
4K*2K/1080p /1080i/720p/576p/576i/480p/480i 24/50/60fps |
Support video format |
24bit/30bit, 36bit deep color |
Support audio format |
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD/Dolby Atoms |
Max bandwidth |
600MHz |
MAX baud rate |
6Gbps |
I/O TMDS signal |
0.5~1.5Volts p-p (TTL) |
I/O DDC signal |
5 Volts p-p (TTL) |
Input cable distance |
≤15m AWG26 HDMI 2.0standard cable |
Output cable distance |
≤25m AWG26 HDMI 2.0standard cable |
Max working current |
200mA |
Power adapter |
AC (50Hz, 60Hz): 100V-240V; Output: DC5V/2A |
Working temperature |
-15℃~55℃ |
Working Humidity |
5%~90% |
Dimension (L x W x H) |
162mm x 94mm x 20mm |
Weight |
380g |
Operating and Connecting
1.Connect one cable from each HDMI source devices to HDMI input.
2.Connect one cable from each display (monitor or projector) to the HDMI outputs.
Setting
RS232 control
Advanced user may need to control the matrix via RS232, connect a PC or control system. Professional rs232 serial interface software (e.g. UART Assist) may be needed as well. Before executing API commands through RS232, ensure the RS232 port of the matrix and control PC are set correctly.
See below are main commands for control
Note: All commands need typing ‘enter’ at the end.
Command |
Function |
EZH |
System help, it will show all commands |
EZSTA |
Show System Status |
EZS RST |
Reset to Factory Defaults |
EZS CAS EN |
Set Cascade Mode Enable (Turn OFF HDCP) |
EZS CAS DIS |
Set Cascade Mode Disable (Turn ON HDCP) |
EZS OUTx VS INy |
Set Output x To Input y {x=[0~4](0=ALL), y=[1~4]} |
EZS OUTx EXA EN |
Set Ex-Audio Output Enable {x=[0~4](0=ALL)} |
EZS OUTx EXA DIS |
Set Ex-Audio Output Disable {x=[0~4](0=ALL)} |
EZS OUTx STREAM ON |
Set Output x Stream ON {x=[0~4](0=ALL)} |
EZS OUTx STREAM OFF |
Set Output x Stream OFF{x=[0~4](0=ALL)} |
EZS INx EDID y |
Set Input x EDID{x=[0~4](0=ALL), y=[0~32]} |
EZS HIP xxx.xxx.xxx.xxx |
Set Host IP Address to xxx.xxx.xxx.xxx |
EZG HIP |
Get Host IP Address |
More details for EDID list and IP setting, please send “EZH” to get help list.
IP control
Connect the USB or RS232 to PC, using the RS232 interface to send command” EZG HIP”, you will get the IP address of the matrix.
Make sure your PC and the matrix on the same network.
Typing in the IP address in a browser
Note: please begin with http://
e.g: You get a IP address 192.168.101.20
please typing in http:// 192.168.101.20
And you will see four sections
Sense Switch, select inputs for each output.
Audio Setting, turn on/off audio breakout
EDID Manage, select EDID for each input, there are more than 4o kinds of EDID options.
System setting, set IP address and alias name.
Packing List
1.HDMI Matrix x1
2.Power supply x1
3. Mount ear x2
4. HOOK&LOOP x2
5. Reusable Cable Ties x2
6. product manual x1
7. IR remote
Related Products
ABOUT HERMECURY
SERVICES
CONTACT
Hermecury
Room 608, Jiaye Plaza, Bixin Rd. No. 2055, Longgang, Shenzhen
© 2020, Hermecury. All rights reserved. 粤ICP备20053134号